Pap2 configuration manual

Common Topics. Device Configuration. Contact Us. They are listed here:. Are you looking for a quote for: Home. Home-based Business. What is your buying time frame? Less Than 1 Month. More Than 6 Months.

What is your data connection? Click on the "Admin Login" button near the top right side of the screen, then click on the "Line 1" tab.

Display Name : Enter your full name, this will show up as part of your caller ID. To save bandwidth, you can change Line 1 "Preferred Codec" to Ga. You can only do this for one line. So, if Line 1 is on G. Click on the SIP tab from the main menu.

Click the tab labeled " Regional " in the menu at the top. You will now be shown the Regional page. Scroll to the bottom of the Regional page. Click the " Save Settings " button after you have selected the time zone. Below we outline the steps assuming the use of Line 1. Note: Now we will setup the line you will use Callcentric with. Normally if you are using the PAP2 only with Callcentric you would use Line 1 by clicking the "Line 1" tab which is how the example below is shown.

If you already have another provider configured on Line 1, use Line 2 instead by clicking the "Line 2" tab. You may also configure Callcentric on both Line 1 and Line 2 by first setting up Line 1 following the directions below; and then repeating the step identically but in the "Line 2" tab.

Click the tab labeled " Line 1 ". Within the Line 1 page is where most of the settings will be configured.